Best F1 25 FFB settings for Fanatec CSL DD and GT DD Pro

01

Official PC and PS5 settings

Set SEN 360, FFB 100, FFS Peak, NDP 35, NFR Off, NIN Off, INT 3, FEI 100, and FOR, SPR, and DPR 100. In F1 25 use Vibration and Force Feedback Strength 80, On Track Effects 30, Rumble Strip Effects 30, Off Track Effects 15, Wheel Damper 3, and Maximum Wheel Rotation 360°.

Use 360° rather than relying on automatic rotation when the platform does not apply the car range consistently.

02

Official Xbox differences

On Xbox, Fanatec recommends NDP 45, with game strength 70 and Wheel Damper 5. Keep On Track and Rumble Strip Effects at 30, Off Track Effects at 15, and rotation at 360°. Platform behaviour differs, so do not copy the PC/PS5 profile without the Xbox adjustments.

FOR, SPR, and DPR may not be available in the same way on Xbox. Leave unsupported tuning values alone rather than inventing substitutes.

03

Refine without hiding front grip

If steering clips in sustained fast corners, reduce the in-game strength in five-point steps. If kerbs dominate the steering signal, lower Rumble Strip Effects before reducing the main force. If the wheel oscillates, add a little damping rather than aggressively increasing every filter.

Fanatec's broader 2026 overview uses a different general baseline from its detailed F1 25 page. Keep the detailed game-specific preset as the starting point and record the publication date rather than silently blending two revisions.

04

Three-lap check

Test a slow hairpin, a high-speed loaded corner, and several kerbs. You should feel steering load build without all three becoming the same maximum force. Confirm 360° in both the wheel and game, then save separate platform profiles if you switch systems.